When it Comes to Air Filters, Change is Good (Clogged Air Filter)

Engine air filters may not seem like a big deal, but when they’re clogged up with dirt, dust, and insects, your engine could wind up choking for air and not delivering you the power and performance it was designed to give.

There are actually a couple of air filters in your vehicle.  One filters the air going into the cabin (the cabin air filter), and the other filters air going into the engine.  That engine filter is the one we’re talking about. After several months and long distances traveled, your engine air filter accumulates the junk it’s preventing from getting into your engine. You may notice your engine misfiring, your acceleration may not be what it used to be, it may make strange noises, and the Check Engine light may come on.

When you notice any of those signs, it’s time to bring in your vehicle to have us figure out what’s going on. We’ll visually inspect your air filter.  Keep in mind that your vehicle’s manufacturer recommends a replacement interval for your make and model.  Typically, many automakers suggest replacing the air filter every 10,000-15,000 miles/16,000-24,000 km.  But if you drive in areas that are dirty and dusty, you should have it checked more frequently.  Also, if you spend a lot of your driving hours in congested urban areas, stop-and-go driving can also tax your engine air filter.

When replacing it, it’s important to get the correct filter. Automakers often offer a variety of engines in the same model, so our technician will make sure you’re getting the one that’s made for your vehicle’s configuration.  Keep in mind that the air filter is protecting your engine from contaminants, and having one that properly fits is important with today’s modern, high-tech engines.  

Replacing your engine air filter can help prolong the life of your engine. You’ll both breathe better.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Putting a Stop to Brake Problems (Brake Service)

It’s safe to say that most drivers take their brakes for granted.  You press on the brake pedal and the vehicle slows down or stops.  It’s easy to see why it is so important for your vehicle’s brakes to be working correctly.  Brakes are an important safety feature of any vehicle.

When it comes to your brakes working correctly, maintaining them regularly will ensure that you will always be able to slow or stop your vehicle in any situation, whether on a sunny day on dry pavement or a bad weather day on slippery surfaces.  And that is why regular brake service is such a sound investment for all drivers. The combo of brakes” and “surprises” doesn’t usually end well.

You might already know about some of the parts of your braking system.  Terms familiar to you might be pads, rotors, and calipers. In short, the calipers press the pads, which in turn contact the rotors.  The resulting friction slows your vehicle.  Another type of brake uses a drum and brake shoes.  But both count on friction to work.

When you come in to have us check your brakes, we’ll make sure those parts are all in good working together and meet the specifications of your vehicle manufacturer.  But there are other important components as well.  Your brake system has several parts of a hydraulic system that uses fluids to conduct the pressure you put on the brake pedal to the brakes on all of your wheels.  There are hoses and lines that can sometimes degrade because of road salt or debris.  

Last and not least, your vehicle has an emergency or parking brake. It’s something you’ll need to prevent your vehicle from rolling when you park on a steep incline. Your parking brake also is an important backup if your hydraulic brakes fail.  

Give your brakes some tender loving care with regular service and they’ll be there when you need them.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Lubricate Driveshaft

See if any of these are happening to your vehicle.  You feel it vibrating excessively underneath when it’s running, or you hear strange clunking, grating, or grinding sounds coming from beneath.  Maybe it’s hard to turn your vehicle, or you can hear squeaking when you’re going slow.  Perhaps you feel a shudder when you step on the throttle.  

Any of those could be signs that your vehicle’s driveshaft might need lubricating, and it’s important to have one of our technicians check it out. Your vehicle’s engine puts out a lot of twisting power.  That force is called torque, and the driveshaft is the part that handles the job of transferring all that torque from your engine to the wheels.  If it’s a four-wheel or all-wheel drive vehicle, it will have driveshafts front and rear. 

Some driveshafts have different segments which are connected by couplings called U-Joints.   So that everything can glide along fine, that whole assembly needs to stay well lubricated.  Our technician can inspect the driveshaft and U-joints to make sure there aren’t any broken or excessively worn parts.  

Many manufacturers recommend servicing and lubricating the driveshaft at certain intervals, and it’s important to keep on that schedule.  It’s essential because poor lubrication can lead to a failure while you are driving, possibly causing other expensive parts to fail.  Not keeping your driveshaft lubricated or failing to maintain it regularly is the top cause of driveshaft problems. 

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com