Month: October 2024

Posted on

Timing is Everything (Timing Cover Replacement)

There’s an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road.  It’s called the timing cover.  It’s important because the timing belt or chain is what coordinates parts of your engine called the camshafts and crankshaft.  When they’re in sync, all runs smoothly.  When they’re not, it can cause some serious engine problems.

If your vehicle has a timing belt, without the protection of the timing cover, that belt can come loose from the timing gears or break.  If your vehicle has a timing chain, the cover keeps engine oil circulating around it which lubricates it.  When that starts to leak because of a bad gasket, the chain may not be getting adequate lubrication.  

If your vehicle has a timing cover problem, you may notice engine oil leaking if a gasket is not sealing tightly.  You may hear a strange metallic sound coming from the engine.  Another sign that timing is off is that you notice you’re losing power when you’re going up a hill. 

Usually, the timing cover will not wear out. But if you drive on roads where you’re getting a lot of debris and dirt kicked up into your engine compartment, the timing cover can get damaged and affect your vehicle’s operation.  It eventually could lead to engine problems, so if you notice any of the symptoms mentioned, have one of our technicians inspect your timing cover and gasket.  

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Differential Essential (Differential Fluid Exchange)

What’s the dif? To an automotive technician, it’s the differential, a part of your vehicle that helps direct power from the engine to the wheels.  The differential is a gearbox that enables the drive wheels to turn at different speeds (they do that when you turn).  

Inside the differential is a fluid that makes sure those gears and other parts are lubricated since there are a lot of metal moving parts in there.  (Your vehicle may have more than one differential in it depending on the drivetrain.) 

As you can imagine, it’s important that the lubricant in those differentials do its job.  Otherwise, the gears may be damaged by heat and friction. The more you drive your vehicle, the more likely it is for that lubricating fluid to break down.

So, it’s important to have the differential fluid exchanged every so often.  Your vehicle’s manufacturer recommends how often your model should have that done, but a common interval is every 30,000-60,000 miles/50,000 km-100,000km.  Regular exchange of differential fluid can reduce premature wear of the gears inside.

Scheduled maintenance goes a long way to preventing differential problems, but sometimes when they begin to fail, you may hear the vehicle sounding a little louder than usual where the differentials are located.  

When it comes to changing the differential fluid, some have a drain plug in them. Others require the entire cover to be removed to drain the fluid.  There are often gaskets that must be changed at the same time to make sure there are no leaks.
Now when someone asks you, “What’s the dif?” You’ll know how essential the differential is and how to keep it running in top shape.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Why did my vehicle fail its emissions test?

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.  

Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen?

One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go.

Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not be working.  It may be physically damaged, or the steady flow of exhaust gases has fouled the converter. 

You may have a bad oxygen sensor. It’s supposed to measure how much oxygen is in your exhaust.  This can cause the air-fuel mixture to be too rich, resulting in too many hydrocarbons in the exhaust. Your ignition system may also have problems, such as worn-out spark plugs.  Dirty fuel injectors can contribute to excess emissions.

Believe it or not, a dirty engine air filter may be the culprit. If it hasn’t been replaced for a while, your vehicle may be emitting too many hydrocarbons –  something that will cause your vehicle to fail the emissions test.

You can usually avoid a failed emissions test by maintaining your vehicle regularly.  The best way to do that is by bringing it to our trained technicians, so your vehicle gets the service it needs, scheduled and non-scheduled.  Plus, you’ll be doing your part to keep our air clean.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

U and your U-Joints (Lubricate U-Joints)

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces.

As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer. 

There are signs you can look for that your U-joints need attention.  You may hear a clunk when the gears shift into drive or reverse.  You may feel your vehicle vibrate as you move down the road.  Other signs are leaks at the back of your transmission or a banging sound right before you lose power.  Sometimes, though, if you wait until you notice these symptoms, the U-joints may already be damaged.  

That’s why it’s important that your vehicle’s U-joints be periodically inspected and lubricated.  At the same time, a technician should thoroughly inspect the driveshaft and other connected components.  

Keep your U-joints in good shape, and both of U will continue to enjoy years of reliable transportation.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com