Author: relayapi

Posted on

Sounds Exhausting! (Exhaust Service)

Most of us know a bad muffler when we hear it.  That loud, rumbling sound is unmistakable. Did you also know you can get a ticket for driving around with a loud exhaust system?

If your exhaust system has a leak in it, it may be allowing poisonous gases inside your vehicle and could make you seriously ill (or even kill you!) if you breathe too much in.

Unfortunately, your exhaust system faces a lot of destructive forces out on the road.  Rust is the worst, and not just in colder climates where they use salt and brine as de-icers.  Exhaust systems can rust from the inside out when moisture condenses inside the pipes.  Vibrations and jolts from rough roads (and the occasional run in with a rock or a curb) can wreak havoc with exhaust systems.  Even a bad oxygen sensor can send too much fuel into the catalytic converter, and the resulting heat can wind up destroying this very expensive component.

Your exhaust system is made up of several parts, and all need to be in good shape in order for you to be sure that the gases created by your engine’s combustion get properly moved out and away from the vehicle. The good news is that many newer exhaust systems are made out of more durable materials like stainless steel.  But all exhaust systems are subjected to some of the roughest elements streets can dish out. So it’s a good idea to have your exhaust system periodically inspected and serviced.

There are a lot of parts to keep track of in an exhaust system, including the muffler, manifold, catalytic convertor, oxygen sensors and the muffler (or maybe your vehicle has more than one).  We strongly recommend having your exhaust system periodically checked so we can catch a problem before it turns into something major… and maybe dangerous.  We can recommend repair or replacement that suits your driving habits and budget. 

Oh, and remember one final benefit to a tip-top-shape exhaust system.  Your vehicle will dump far less pollution into the atmosphere if it’s working the way engineers designed it.  We’ll all breathe a little easier when our exhaust systems are doing their job right.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

In That Case? (Transfer Case Exchange)

Ever wonder how all-wheel-drive or 4-wheel-drive vehicles get the power from the engine to the front and rear wheels? The magic happens in what’s called a transfer case.  In some all-wheel-drive vehicles, it’s sometime called a power take-off unit, or PTU.

Inside the transfer case is a set of gears.  And to keep those gears meshing smoothly, they have to be lubricated and kept cool.  What does that is called transfer case fluid. Depending on your vehicle’s type of transfer case, it is filled with either an automatic transmission fluid, a gear oil that’s a bit thicker or transfer case fluid designed to be use for your transfer case.

As happens with all lubricating fluids, the transfer case fluid has things in it that break down the older they get.  They have corrosion inhibitors, detergents and anti-foaming agents that keep the lubricant from getting air bubbles in it. Transfer cases don’t have filters in them to clean out impurities.

If you don’t have your transfer case fluid exchanged for fresh, you risk damage to the case, and that can run into thousands of dollars.  So the wise driver makes sure the fluid is changed according to the manufacturer’s recommendations.  For many vehicles, that is every 30,000 mi/50,000 km, but some require it more frequently.   Your vehicle service facility can advise you on what your vehicle’s optimal interval is.

During the fluid exchange, any metal filings that may have come off are cleaned off of the drain and fill plugs that are usually magnetized to catch the stray metal pieces.

If you hear grinding noises coming from under your vehicle or if it is having trouble shifting gears or going in and out of 4-wheel-drive, those could be signs your transfer case needs service. In that case, have our technicians check it out.  The best plan of action?  Keep your transfer case fluid maintained and it should keep you heading down the road for years to come.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Keeping Your Cool (Water Pump Replacement)

No matter what the temperature is outside, it’s important for your vehicle’s engine to remain cool, calm, and collected.  Well, cool, anyway. If your vehicle has a gasoline engine, it’s powered by a bunch of explosions involving spark plugs, pistons, gasoline, and air.  And the by-product of all those things working together? HEAT.

There’s a whole cooling system to keep everything at a tolerable temperature for your engine’s parts, and a key part of that is the water pump.  Technically, it’s pumping more than water. It should actually be called the “coolant” pump since the liquid that circulates through the system is a mixture of water and coolant. 

Basically, the water pump keeps this coolant moving through your engine, where it picks up the engine heat, and then is pumped into the radiator where it gets rid of that heat.  When a water pump fails, the engine heat can build up.  When you get a warning light on the dash (either a gauge or a light) that shows the temperature is too high, it could mean a bad water pump. 

They can fail for many reasons. They have bearings in them that wear out, as does the seal between the pump and the engine. They’re often driven by a belt or chain that can go bad.  Corrosion can spell the end of a water pump, too. 

If a technician determines your water pump has failed, it’s time to replace it. In addition, other components of the cooling system will be inspected.  The best way to avoid a water pump failure is regular maintenance of your cooling system which includes regular draining and flushing of the coolant. 

Just like it’s important for you to keep your cool, the same goes for your vehicle’s engine.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Differential Service

When you’re driving and turn a corner, you probably aren’t aware of all that’s going on with your wheels.  The outside wheels have a longer distance to travel than the inside wheels, so there are gears that allow the wheels to go at different speeds when you turn. 

That set of gears is called a differential.  In front-wheel drive vehicles, it’s by the transmission and called a transaxle.  Rear-wheel drive vehicles have the differential, naturally, on the rear axle. Many all-wheel and four-wheel drives add a center differential since power has to go to the front and rear wheels. (Some newer vehicles power wheels with electric motors, but that’s a whole different story.)

Time and distance traveled eventually can take their toll on the differential, and you may notice some noises you hadn’t heard when your vehicle was newer.  Sometimes you’ll hear a whir that might change in pitch when you turn.  You may hear clicking sounds when you’re moving.  Others describe rumbling sounds coming from underneath during a turn. Another symptom of possible differential problems may be vibrations or shakes the faster you go. 

All of these could be signs that you have problems with a differential. One common cause of differential problems is the gears aren’t getting enough lubrication.

These can all have serious effects on your driving.  You may find it hard to turn, or your wheels may lock up. That could put you or drivers around you in a dangerous position. 

It’s better to take care of differential problems before they get too serious.  Bring in your vehicle so we can have a technician check yours out.  They can see if there are any differential fluid leaks or failing gaskets.  In some cases, we may recommend your differential fluid be replaced.  And if there are any mechanical issues, some components may need to be replaced as well. 

When your differential is maintained, you’ll be doing your vehicle a good turn.  

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, “My get-up-and-go got up and went.” If your vehicle’s engine’s fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle’s acceleration isn’t what it used to be, ask your service advisor if you might need your vehicle’s fuel and air induction systems cleaned.

As the hours pile up on your engine, carbon deposits can build up.  It’s not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you’re noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn’t have the pep it used to.

While it’s a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions.

The fuel and air enter your engine through the fuel induction system and air induction system. Because of things like high operating temperatures and impurities, carbon in the fuel can leave behind dark, sooty deposits in the fuel induction system such as the fuel injectors and the throttle body. These and other residue reduce your engine’s efficiency and performance. Our service center can use special fuel injector cleaners to remove those deposits from your engine.

The technician may manually clean some of the deposits and also put a fuel additive in the fuel tank that will get rid of other deposits that are still in the fuel system

Keeping the air induction system clean is also important.  A technician can use a liquid cleaner specially designed for the job. Not only can this improve your fuel economy, it may also reduce exhaust emissions and help your engine last longer.

Most gasoline now contains detergents that help reduce or prevent these problems, but direct injection is now being used in more vehicles that are more susceptible to clogging. Ask your service advisor if your vehicle could benefit from fuel and air induction cleaning. 

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Oh, Stop! (Disc Brake Service)

Every time you drive your vehicle, you wear down your brakes just a little bit.  And after a while, that adds up.  Gradually, your stopping power isn’t like it used to be.  Since brakes are one of your vehicle’s most important safety features, it just makes sense to keep them performing well.

Most vehicles have disc brakes.  One key component, as the name suggests, is the disc.  Most vehicles have discs on their front and rear wheels.  The discs (also called rotors) are made of metal, and each rotates with the wheel hub.  Your brakes also have pads that make contact with the rotors when you press down on the brake pedal, and the friction stops your vehicle.

After many, many stops, that friction wears down both the pads and the discs and reduces their ability to stop the way you need them to.  The discs may also become uneven from all the heat they generate, and your brakes won’t stop as well as they used to when they were newer. 

Some signs that your rotors need attention include vibration at the wheels when you stop, discolored rotors (the metal looks blue), excessively hot rotors, or grooves in the metal.  If you see any of these signs, it’s time to bring in your vehicle for us to inspect your brakes. 

A technician will measure the thickness and trueness of the rotors and check the surfaces for wear.  If they need to be replaced, they’ll be done in pairs, so if a front rotor is bad, the other front rotor will also be replaced. Usually, your brake pads will be replaced at the same time.  You can ask your service advisor if higher-performance brakes would benefit you.

When your vehicle is at the shop, the technician will check other components of your brake system to make sure they are operating safely. Brakes are vital to the safe operation of your vehicle.  Keep them well maintained so they can be there when you need them.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it’s mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn’t sending the engine’s computers the correct information on the amount of air going in the engine, the fuel/air mixture isn’t going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver’s case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

I Can See Clearly (Wiper Blade Replacement)

Warm weather can bring severe storms, and when the rain is coming down hard, that’s one time you really need to be able to see as clearly as possible out your windshield.  Having wiper blades that are fit for the job are important to maintain that safe view.

Maybe you live in a climate where you use blades made for winter weather and you have haven’t changed them since the weather changed.  Those blades are made of heavier materials and don’t work as well in warmer temperatures. Blades made for warm temperatures are lighter and clear water better in the warmer months.

The general rule of thumb is you should change your blades every six months, but if you use them a lot, you might have to change them more often.  A couple of signs that your blades need changing? If you are seeing streaks on the glass or hearing a chattering sound when your wipers are working, time for a new pair.

Wiper blades have cleaning windshields on vehicles for more than 100 years.  The original designs have a multi-part frame that are better for flatter windshields.  But newer vehicle designs now have curvier windshields, so a more recent design is called a blade wiper.  It’s designed to conform better to the glass so cleans it better. 

Conventional wipers also aren’t as aerodynamic as blade wipers. Wind buffeting can reduce the pressure they apply on the rubber to the glass.  With a spoiler as part of their design, blade wipers are pressed more tightly to the glass, an advantage in clearing water from it.

Another option is hybrid blades, essentially a conventional blade with a plastic shell around the wiper’s frame that makes it more aerodynamic and, some say, gives it a more aesthetic look. 

There are lots of choices, so consult our service professionals for a recommendation on which blade fits your needs—and budget—best.  Keep your eyes on the road and keep your windshield sparkling clean, rain or shine.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com

Posted on

A Head Start on Starting (Battery Testing)

If your vehicle isn’t starting or doesn’t sound like it used to when you crank it, the culprit may be the battery.  You may have left a light on, or something plugged into one of charging ports.  Maybe you accidentally left your vehicle in the “on” or “accessory” position when you last got out. Maybe you’ve left it in the garage or driveway for a long time without starting it.  That can spell the end for a vehicle battery.

It’s also possible that your battery is just simply too old. There’s no standard lifespan of a battery, but 3-5 years is about average, even though some people only get 2 and heavier duty batteries may last many more. It’s possible your battery is defective, too.  And it could be your vehicle’s charging system isn’t recharging the battery. 

Whatever the cause, if you’re having problems with your battery, it’s a good idea to bring it in and have us perform a thorough battery test.  With state-of-the-art testing equipment, a technician will see if there’s a bad cell in the battery or if it can be recharged.  We will also look at the date it was made. 

At the same time, the technician will look at the whole charging system, including the alternator, starter, cables, and connections.  From there, the service advisor can go through your options. 

Your best chance of not getting stranded by a dead battery is to have your system checked as part of a regular maintenance plan.  That should give you a head start on dependable starts.

Tylers Auto TV
12485 SW MAIN ST
TIGARD, OR 97223
(503) 639-5588
http://www.tylersautomotive.com